Brother HL-2400C Series - Manual (Page 75)

USER’S GUIDE
4–12
MODE Button Settings in BR-Script 2 Mode
The following table shows all the selections you can make with the Mode
button in the BR-Script 2 mode.
✒ Note
The mode menus and settings that can appear vary according to the
current emulation mode, printer status, and any options that may be
installed in the printer.
Mode Menu Setting Menu Sub-Setting Menu Setting
INTERFACE MODE
Same as HP PCL5C Mode
FORMAT MODE PAGE FORMAT MODE PAPER=LETTER
(For 120V model)
PAPER=A4
(For 220/240V model)
LETTER, LEGAL, A4, A5, B5,
JIS B5, EXECUTIVE, COM10, C5
and DL
X OFFSET=0 -500 (left) to +500 (right) dots
Y OFFSET=0 -500 (down) to +500 (up) dots
exit Exit to PAGE FORMAT MODE
COLOR MODE Same as PCL5C mode
exit Exit to PAGE FORMAT MODE
RESOLUTION MODE RESOLUTION RESOLUTION=600 300 or 600 dpi
CAPT SETTING CAPT=ON ON or OFF
HRC SETTING HRC=MEDIUM OFF, LIGHT, MEDIUM, or DARK
exit Exit to RESOLUTION MODE
CARD OPERATION CARD1 ( 2 ) When the commercial flash memory card or the HDD card has not been formatted:
CARD1
CARD2
exit
FORMAT CARD Format the flash memory card or
the HDD card.
exit Exit to CARD OPERATION
CARD 1 (2)
CARD OPERATION CARD1 ( 2 ) When the commercial flash memory card or the HDD card has been formatted:
CARD1 EXECUTE DATA Execute the data on the card.
CARD2 DATA ID=##### Execute the selected data.
CARD LIST Print the contents of the card.
SAVE SAVE DATA Send data to be saved.
SET KEY--> END End saving the data.
DATA ID=##### Set data ID for saved data.
exit Exit to CARD OPERATION
DELETE MACRO ID=##### Delete the selected macro.
DATA ID=#### Delete the selected data.
FONT ID=##### Delete the selected font.
FORMAT CARD Format the card.
SET –> DELETE ALL Execute formatting the card.
exit Exit to FORMAT CARD
OPERATION
exit Exit to CARD 1(2) OPERATION