Setting up the printer -4, Removing the protective parts -4, Setting up the printer – Brother HL-2400C Series User Manual

Page 31: Removing the protective parts

Text mode
Original mode

USER’S GUIDE

2–4

SETTING UP THE PRINTER

Removing the Protective Parts

After checking that you have all of the correct parts, temporarily place the
printer where you can easily reach all sides. Remove the protective parts
that secure the printer against damage during transportation, as shown
below:

✒ Note
Keep all packing materials for transporting or storing the printer later.

1. Remove the protective parts as shown below.

Fig. 2-4 Removing the Protective Parts