Brother HL-2400C Series - Manual (Page 186)

CHAPTER 6 TROUBLESHOOTING
6–7
Service Call Message Meaning Action
99 SERVICE D3 C switching clutch error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE D4 K switching clutch error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE D5 K,Y switching solenoid error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE D6 C, M switching solenoid error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E1 Developing motor error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E2 Main motor error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E3 Drum error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E4 Toner empty sensor error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E5 Transfer Roller solenoid error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E6 Drum cleaning solenoid error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E7 Drum cleaning clutch error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E8 Fusing Unit clutch error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE E9 Belt marker sensor error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE EL Erase LED error Turn off the printer. Wait a
few seconds, then turn it on
again.
99 SERVICE F0 Cooling fan error Turn off the printer. Wait a
few seconds, then turn it on
again.