Brother HL-2400C Series - Manual (Page 106)

CHAPTER 4 CONTROL PANEL
4–43
■ Form Feed Suppress
You can turn on or off the form feed suppress function in this mode menu
as follows:
Display Message Form Feed Suppress
FF SUPPRESS=OFF Turn off the form feed suppress function.
(Factory setting)
FF SUPPRESS=ON Turn on the form feed suppress function.
If pages contain no print data, the printer would normally print blank
pages. When you turn this function on, you can suppress printing blank
pages.
When the printer is used in a network environment, it may deliberately
print a blank page at the end of each print job. When you turn on this
function, the printer does not print blank pages.
ERROR PRINT
✒ Note
The setting in this mode menu is effective only in the BR-Script 2 mode.
It does not appear in any other emulation modes.
You can turn on or off the error print in this mode.
Display Message Error Mode
ERROR PRINT=ON Turn on the error print so that the printer
prints an error if it occurs.
ERROR PRINT=OFF Turn off the error print so that the printer
does not print an error if it occurs. (Factory
setting)