Brother HL-2400C Series - Manual (Page 138)

CHAPTER 4 CONTROL PANEL
4–75
TEST Button
You can test the printer or print out the list of fonts with the Test button.
To do so, hold down the Shift button and press the Test button. You will
then enter test mode where you may test the printer or print out the list of
fonts.
To test the printer, follow these steps:
1. Press the Sel button to set the printer off-line.
2. Hold down the Shift button and press the Test button.
When you enter test mode, the display shows the first test mode item.
3. Press the ▲ or ▼ button until the desired test mode appears on the
display.
Display Message Test Mode
DEMO PAGE Prints out the demonstration.
TEST PRINT Performs the printer test and prints
out the test pattern.
PRINT CONFIG Prints out the list of panel button
settings you have configured for
the printer as user settings.
PRINT FONTS I Prints out the list of internal or
resident fonts.
PRINT FONTS C Prints out the list of optional fonts
stored in the font cartridge/card.
PRINT FONTS P Prints out the list of permanent
download fonts.
exit Exits from the test mode. The
printer does not perform the test.