Brother HL-2400C Series User Manual

Page 200

CHAPTER 6 TROUBLESHOOTING

6–21

Question

Recommendation

Off set image

ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.
ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.

1) Check that specified paper is used.
2) Check the oil is not empty.
3) Replace the cleaning roller

Poor fixing

1) Check that specified paper is used.
2) Check the media type mode is selected correctly.

Poor fixing

Wait for a while and try again.

Poor fixing when printed on
thick paper

Set the printer to thick paper mode through the control
panel or the printer driver.

Blurred vertical band and spots
of colour.

Clean the Charging Wire as shown below.
1. Open the Front Cover and take the Cleaning Brush

out of the printer.

2. Open the Top Cover and take the (OPC) Belt

Cartridge out of the printer.

3. Brush the Charging Wire with the Cleaning brush as

shown below.

Dirt on the printed paper.

Clean the Paper Guide, the Registration Roller and the
Exit Roller referring to ‘Periodical Printer Cleaning’ in
Chapter 5.

If the same problem still occurs, contact your dealer or our authorized service
representative.