Brother HL-2400C Series - Manual (Page 43)

USER’S GUIDE
2–16
Turning the Printer On
Plugging in the Power Cord and Turn the Printer On
1. Make sure that the Power button is turned OFF: the button is on the
front left hand side of the printer.
2. Attach the power cord to the printer and plug it into an appropriate
AC outlet.
Fig. 2-21 Plugging in the Power Cord
3. Turn the printer on by pressing the Power Button.
!
Caution
Check the AC voltage. This printer should be operated at the specified
voltage and frequency.
• USA and Canada: AC 120 V, 50/60 Hz
• Europe, Australia and others: AC 220 to 240 V, 50/60 Hz
Since this printer must be electrically grounded, the power cord
should be connected to a grounded AC outlet.
The total length of the power cord, including extension cords, should
not exceed 5 meters (16.4 feet). Use of a longer power cord may result
in reduced voltage or malfunctions.
Do not unplug the power cord to turn off the printer.
The printer should be installed near a power outlet which is easily
accessible.