Brother HL-2400C Series - Manual (Page 131)

USER’S GUIDE
4–68
RESET Button
You can reset the printer with the Reset button. The print data that the
printer has already received from the computer is cleared and the printer
settings are restored to the user settings or factory settings.
Any temporary download fonts and macro settings you set with
commands in HP PCL5C mode are also cleared.
When you want to reset the printer, hold down the Shift button and press
the Reset button. You then enter the reset mode where you reset the
printer.
To reset the printer, follow these steps:
1. Press the Sel button to set the printer off-line.
2. Hold down the Shift button and press the Reset button.
When you enter the reset mode, the display shows the first reset mode
item.
3. Press the ▲ or ▼ button until the desired reset mode appears on the
display.
Display Message Reset Mode
RESET PRINTER Resets the printer and restores all
printer settings–including
command settings–to settings you
have previously made with the
panel buttons.
RESET SETTING 1 Resets the printer and restores all
RESET SETTING 2 printer settings–including
command settings–to the selected
number (1-2) of user settings you
have previously made with the
Mode button.
FACTORY SETTINGS Resets the printer and restores all
printer settings–including
command settings–to the factory
settings. See “List of Factory
Settings.”
RESET PARTS LIFE This menu appears only when a
maintenance part is being
recommended for replacement.
Resets the life counter of the
maintenance part that has been
replaced.
exit Exits from the reset mode. The
printer is not reset.