Brother HL-2400C Series - Manual (Page 176)

CHAPTER 5 MAINTENANCE
5-35
2. Remove the two screws and cover plate from the MIO interface slot.
3. Unpack the MIO card and hold it by its edge.
✒ Note
Do not touch the card surface. If static electricity collects, it damages the
card.
4. Insert the card until it is securely seated.
5. Secure the MIO card with the two captive screws on the card.
6. Retain the cover plate and two screws removed in 2 in case you want
to remove the MIO card later.
Fig. 5-40 Installing the MIO Card
RAM Expansion
This printer has 16 Mbytes or 32 Mbytes of memory standard, depending
on the printer model, and 3 slots for optional expansion memory. The
memory can be expanded up to 112 Mbytes by installing commercially
available single in-line memory modules (SIMMs). (The standard
memory fitted can vary depending on the printer model and country.)
MIO Card
MIO Interface Slot