ETC Unison DRd Semi-Recessed Installation Kit - Manual (Page 3)

E T C I n s t a l l a t i o n G u i d e
DRd Semi-Recessed Installation Kit
DRd Semi-Recessed Installation Kit Installation Guide Page 3 of 8 Electronic Theatre Controls, Inc.
Finished Installation Dimensions
Required Tools and Hardware
The items listed below are required (not provided) to install the Semi-Recessed installation kit.
• 6 each 1/4” mounting hardware (lag bolts preferred) for securing the recessed enclosure to
framing
• adjustable wrench to secure the DRd rack into the enclosure
• #10 nut driver or socket for extension rail adjustment or removal
• #2 Philips head screwdriver to secure the front cover during final installation
Kit / Rack Type
Height Width Depth
inches mm inches mm inches mm
DRd6 Semi-Recessed kit with DRd6 installed 36 906 22 559 10 250
DRd12 Semi-Recessed kit with DRd12 installed 45 1,143 22 559 10 250
DRd6 kit
36”
(906mm)
DRd12 kit
45”
(1,143mm)
Both kits are
22” (559mm)
Both kits are
10” (250mm)
The dimensions in the table below are provided as
an estimation of the final installation including a
DRd rack enclosure and cover.