ElmoMC AC Input Digital Servo Drives-Bassoon - Manual (Page 37)

Bassoon Installation Guide Installation
MAN-BASIG (Ver. 1.502)
www.elmomc.com
37
1
3
4
5
6
7
8
Encoder
B
as
so
on
Feedback B - J2
SUPRET
+5v
INDEX-
INDEX
CHB-
CHB
CHA-
CHA
2
INDEX-
INDEX
CHB-
CHB
CHA-
CHA
2
Encoder supply voltage return
Encoder +5v Supply
BAS0024A
Figure 22: Differential Auxiliary Encoder Inputs on J2 - Connection Diagram
3.5.6.3. Single-Ended Auxiliary Input Option on Feedback B (J2) (YA[4]=2)
The Bassoon can be used as a slave by receiving the position data (on Port B) of the master
encoder in Follower or ECAM mode.
Below are the signals on the Auxiliary Feedback port when set up to run as a single-ended
auxiliary input:
Pin Signal Function Pin Positions
1 SUPRET Supply return
2 +5 V Encoder/Hall +5 V supply voltage, 5 V
@ 200 mA
3 — —
4 INDEX Index
5 — —
6 CHB Channel B
7 — —
8 CHA Channel A
Table 9: Single-Ended Auxiliary Encoder Input Pin Assignments on J2