Setting and activating options (papopt), Activation of tractors (autotra), Setting and activating options (papopt) – Dascom LA550W User Guide User Manual
Page 75
User guide
The Menu
67
Setting and activating
options (PapOpt)
Selection of the optional tractor; see
any of these options to Not installed, they will not be displayed in the
paper path quick selection menu.For setting the tractor
Press PapOpt (3) key.
Press Front2 (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: installed/Not installed
Default Setting: installed
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
Activation of tractors (AutoTra)
This parameter only appears if the optional tractor is installed. It reg-
ulates the activation of tractors when there is no more paper left in
one of them.
Press AutoTra (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Off/T1=T2
Default Setting: Off
If an optional tractor is installed and the Off parameter is activated,
only the selected tractor is supported (either via the menu or an ESC
sequence). If the selected tractor is out of paper, printing stops.
If an optional tractor is installed and you select T1=T2, the printer will
load paper from the other tractor if the selected one is empty.
Confirm the setting by pressing the Set key (1).
FFmode
PapOpt
Online
Setup
2
1
3
4
Back
Next
Front2
Online
Setup
2
1
3
4
Back
Next
Installed
*
Online
Setup
Set
<
>
Exit
2
1
3
4
AutoTra
Online
Setup
2
1
3
4
Back
Next
AutoTra=Off
*
Online
Setup
Set
<
>
Exit
2
1
3
4