Selecting protocol (emulation), Selecting protocol (emulation) – Dascom LA550W User Guide User Manual
Page 59
User guide
The Menu
51
Selecting Protocol
(emulation)
Selects the emulation for the serial or parallel interface. When a
printer understands the control set written for another printer type, it
is said to emulate the other printer.
The selected emulation of the active interface is shown in on-
line or Offline mode in the second line of the printers display.
For more information refer to
Press Protocol (3) key.
Press Parall. (2) if you want to select a emulation for the parallel in-
terface or Serial (3) if you want to select a emulation for the serial
interface of the printer (in our example: Parall.).
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: DEC PPL2, Epson ESC/P2, IBM XL24,
IBM XL24+AGM,
Default Setting: Epson ESC/P2 (Parall.)
DEC PPL2 (Serial)
If the printer is switched to Online mode after changing the emula-
tion, it performs a reset.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
ESCChar Protocol
Online
Setup
2
1
3
4
Back
Next
Parall. Serial
Online
Setup
2
1
3
4
Back
Next
Epson ESC/P2
*
Online
Setup
Set
<
>
Exit
2
1
3
4