Print head gap manually (head) – Dascom LA550W User Guide User Manual
Page 70
User guide
The Menu
62
Print head gap manually (Head)
This parameter is ignored if the automatic gap adjustment (AGA) is
activated; see
Automatic gap adjustment (AGA) (page 68)
Adjusts the print head gap manually; separately adjustable for each
paper path.
Press Head (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: 0 to 100
Default Setting: 18
Select the Head = 18 parameter for normal paper. Use a greater dis-
tance for thicker paper.
Recommended values for the print head gap:
If you change this value, this may affect the print quality.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Head
Online
Setup
2
1
3
4
Back
Next
Head= 18
*
Online
Setup
Set
<
>
Exit
2
1
3
4
1 layer
2 layers
3 layers
4 layers
5 layers
6 layers
18
26
34
42
50
58