Dascom LA550W User Guide - Manual (Page 57)

User guide The Menu
49
Selecting font (Font) This parameter s elects the character style and its quality perma-
nently.
Press Font (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: see table below
Default Setting: Draft
Character styles marked with an I (for example Courier I LQ ) are
IBM compatible fonts.
Fonts with the identifier PS in their name are proportional fonts
which use only the space actually required for the character width.
The abbreviation NLQ stands for Near Letter print quality, which
means that the printer works faster but with a slightly lower resolu-
tion. LQ stands for Letter Quality, which means that the resolution is
higher at the expense of a slightly slower speed.
Confirm the setting by pressing the Set key (1).
Font LPI
Online
Setup
2 1 3 4
Back Next
Roman NLQ*
Online
Setup
Set < > Exit
2 1 3 4
Available fonts
Draft S Serif PS LQ OCR-A NLQ
Draft Copy Courier NLQ OCR-A LQ
Roman NLQ Courier LQ Courier I NLQ
Roman LQ Prestige NLQ Courier I LQ
Roman PS NLQ Prestige LQ Cour I PS NLQ
Roman PS LQ Script NLQ Cour I PS LQ
Sans Serif NLQ Script LQ Orator NLQ
Sans Serif LQ OCR-B NLQ Orator LQ
S Serif PS NLQ OCR-B LQ
Example:
Roman LQ:
Roman PS LQ: