Automatic line feed (auto-lf), Menu lock (menlock), Automatic line feed (auto-lf) – Dascom LA550W User Guide User Manual
Page 66: Tion, Menu lock
User guide
The Menu
58
Automatic line feed
(Auto-LF)
Switches the automatic line feed (LF) on or off after receiving the
signal CR (carriage return).
Press Auto-LF (3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Off/On
Default Setting: Off
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Menu lock (MenLock)
With MenLock = Off, all functions and settings are accessible with-
out restriction in Online, Offline and Setup mode.
If MenLock = Menu is activated, all functions and settings are still
accessible in Online and Offline mode, however, in Setup mode you
can only access the parameter groups Adjust (setting the print head
gap [Head], top of form [TOF] and tear position [Tear]), Paprpath
(setting the paper path), Font (setting the font) and the character
spacing (CPI), while access to Menu mode (Menu key) is disabled.
If you select MenLock = All, you can access the Online/Offline,
Load/Park, Paper and Paper Feed (LineFeed/Form Feed,
/
)
functions in Online and Offline mode while Setup mode is disabled.
In this case, the Setup menu can only be called up by holding the
key Setup while switching on the printer.
Press MenLock (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Off, Menu, All
Default Setting: Off
Confirm the setting by pressing the Set key (1).
Auto-CR Auto-LF
Online
Setup
2
1
3
4
Back
Next
Auto-LF=On
*
Online
Setup
Set
<
>
Exit
2
1
3
4
MenLock Language
Online
Setup
2
1
3
4
Back
Next
MenLock=Menu
*
Online
Setup
Set
<
>
Exit
2
1
3
4