Paper jam (single sheets), Paper does not move to tear off position – Dascom LA550W User Guide User Manual
Page 108
User guide
Troubleshooting
100
Paper jam (single sheets)
Open the top cover and remove the paper manually or with the
functions LF (line feed)/FF (form feed) in Offline mode from the
printer.
Before you replace the single sheet, refer to the instructions in the
section
Pay attention to the following points:
`
Set single sheet feed to the corresponding paper width.
`
Insert the paper straight as far as possible.
`
Adjust the print head gap to the paper thickness (card-like pa-
per etc.) (if AGA=Off).
Paper does not move to tear off
position
Single sheet inserted
It is only possible to tear off when fanfold paper is used, refer to the
section
Moving the paper to the tear position
Problem
Corrective action
This manual is related to the following products: