Selecting interface (interf.), Interface buffer (buffer) – Dascom LA550W User Guide User Manual
Page 64
User guide
The Menu
56
Selecting interface (Interf.)
Selects the interface. Printer is configured either for parallel or serial
connection or in automatic change for both (Auto).
Press Interf. (3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Auto, Parallel, Serial
Default Setting: Auto
Interf.=Auto: Printer switches automatically between parallel and
serial interface.
Interf.=Parallel: Printer using parallel interface.
Interf.=Serial: Printer using serial interface.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Interface buffer (Buffer)
Selects the size of the interface buffer.
Press Buffer (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: 0, 16, 32, 48, 64
Default Setting: 32 KB
If buffer = 0 KB and the serial interface is selected, or if
the setting Auto is active, the actual buffer size will be
512 bytes.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to leave the parameter group Interf.. Press the Next key (4)
again to access the next group of parameters.
Serial
Interf.
Online
Setup
2
1
3
4
Back
Next
Interf.=
Auto*
Online
Setup
Set
<
>
Exit
2
1
3
4
Buffer Timeout
Online
Setup
2
1
3
4
Back
Next
Buffer=32 KB
*
Online
Setup
Set
<
>
Exit
2
1
3
4