Other operating systems – Dascom LA550W User Guide User Manual
Page 24
User guide
Printer drivers
16
11 Select the printer type. Click on OK, then on Next.
12 If required, edit the name of the default printer and specify whether
you wish to use the printer as a default printer by clicking on the rel-
evant option. Then click on Next.
13 If you are using the printer as a network printer, you have the option
of sharing it with other network users. In this case you must enter an
access name which will be displayed to the other network users.
Then click on Next.
14 Specify whether you wish to print out a test page (recommended) by
selecting the relevant option and click on Finish. The printer driver
will now be installed.
The printer driver only works if the Epson emulation is selec-
ted (default setting for parallel interface). For details how to
select Epson emulation, refer to
The printer drivers either support the printer font Draft or Draft
Copy, not both. Selection, which kind of draft font is used, has
to be made in the printers menu mode (see
page 49). If you want to switch between print qualities NLQ
(Near Letter Quality) and LQ (Letter Quality), you also have to
make this selection in menu mode.
Other operating
systems
The printer can also be used with other operating systems such as
Linux or Unix. In this case, set the printer to the Epson emulation or
IBM emulation for which default drivers are available in most oper-
ating systems.