Selecting interface timeout (timeout), Automatic carriage return (auto-cr) – Dascom LA550W User Guide User Manual
Page 65
User guide
The Menu
57
Selecting interface timeout
(Timeout)
The Timout option allows you to define the duration after which the
interface switches back to the Stand-by state, when the printer stops
receiving data.
Press Timeout (3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: 2 sec … 30 sec
Default Setting: 2 sec
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Automatic carriage return
(Auto-CR)
Switches the automatic carriage return on or off after receiving the
signal LF (line feed).
Press Auto-CR (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Off/On
Default Setting: On
Confirm the setting by pressing the Set key (1).
Buffer Timeout
Online
Setup
2
1
3
4
Back
Next
Timeout=2 sec
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Auto-CR Auto-LF
Online
Setup
Back
Next
2
1
3
4
Auto-CR=On
*
Online
Setup
Set
<
>
Exit
2
1
3
4