Dascom LA550W User Guide - Manual (Page 42)

User guide Paper handling
34
Paper transport
Loaded paper (fanfold paper/single sheets) can be transported in
the printer in several ways.
Make sure that the printer is in Offline mode (Pause); press the On-
line key, if necessary.
`
Key Park (1): If fanfold paper is loaded in the printer, it is fed to
the park position or the tear position. If a single sheet is loaded,
it is ejected.
`
Key (2): Short keypress: Paper is transported upwards step by
step. Long keypress: Continuous transport upwards.
` Key (3): Short keypress: Paper is transported downwards step
by step. Long keypress: Continuous transport downwards.
`
Key LF/FF (4): Short keypress: Line Feed (LF) is effected.
Long keypress: Form Feed (FF) is effected.
`
Key Online (4): Moves Paper to tear position if the automatic tear
function is activated.
The maximum value of the paper return feed is 22 inches.
You can not remove paper generally if the Tear parameter is set
to No Tear/Reverse in the active macro.
Pause Front1
Online
Setup
Park LF/FF
2 1 3 4