Dascom LA550W User Guide - Manual (Page 73)

User guide The Menu
65
Barcode (Barcode) With this function selected it is posible to print different barcodes and
LCP (Large Character Printing).
Press Barcode (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: On/Off
Default Setting: Off
The definition and activation is performed by special sequences
through the interface. Since this selection is possible for all emulati-
ons it must be noted that conflicts in sequence conformity with the
selected emulation may occur. (The possible barcodes, LCP cha-
racters and the operation of these functions are described in the
Programmer’s Manual ).
Confirm the setting by pressing the Set key (1).
Normal characters and bar-
code (Barmode) Allows printing of normal characters on the left and right of the bar-
code.
Press Barmode (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Secured/Unsecured
Default Setting: Unsecured
In secured mode, the space which the barcode characters require
is “protected”. In each line, other barcode or normal characters can
also be printed. These additional characters are printed in the line
currently being printed and and in the subsequent lines, without af-
fecting the barcode which is already being printed. Consequently,
normal characters can be printed in every line to the right or left of
the barcode.
Barcode Barmode
Online
Setup
2 1 3 4
Back Next
Barcode=Off *
Online
Setup
Set < > Exit
2 1 3 4
Barcode Barmode
Online
Setup
2 1 3 4
Back Next
Secured *
Online
Setup
Set < > Exit
2 1 3 4