Moving the paper to the tear position – Dascom LA550W User Guide User Manual
Page 43
User guide
Paper handling
35
Moving the paper to the
tear position
Your printer by default moves the paper into tear position once pa-
per is loaded. If you deactivate this feature in the printer’s menu (set-
ting: Manual) you can use the Tear key to move the paper to the tear
position. For more information refer to
Swing the soundproofing cover towards the front (see below). The
tear edge is located at the front side of the paper output opening.
Make sure that the printer is in Online mode (Ready). If necessary,
press the Online key.
Press the Tear (4) key. The printer moves the perforation edge of
the fanfold paper to the tear edge.
The display changes to…
Tear off paper at the tear edge A.
Make sure you tear the paper off
straight, otherwise a paper jam may
occur.
After having torn off the paper, press the Online key. The printer re-
turns the paper to the first printing position.
If a print job is active, the printer returns the paper automatically to
the first printing position.
The tear function can be deactivated completely (No Tear/
Reverse). In this condition the Tear key is not accessible; the
paper can not be moved reverse. For more information, please
refer to
View and tear position (TearView)
Ready
Front1
M1 EPS
Tear
Online
Setup
2
1
3
4
Ready
Front1
M1 EPS
Online
Setup
2
1
3
4
A
Ready
Front1
M1 EPS
Online
Setup
2
1
3
4