Dascom LA550W User Guide - Manual (Page 55)

User guide The Menu
47
Menu parameters
The following section introduces and explains all the possible menu
settings.
Press Setup key.
Press Menu (1) key.
Setup mode and Menu mode may be disabled. Hold
down the Setup key while switching on the printer to
enable menu mode. If you want to enable access to this
mode permanently, you need to change the appropriate
setting in the macro; see
Menu lock (MenLock) (page 58) .
Printing out macro
configurations (Print) Prints the menu configurations using the active paper feed; see
Menu settings (example) (page 89) .
Press Print (2) key, to start the printout.
Loading menu
configurations (Macro) A menu is loaded, you can choose between four menus; see Menu
handling (page 43) .
Press Macro (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Load Macro=1/2/3/4
Default Setting: Load Macro=1
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Ready Front1
M1 EPS Online
Setup
2 1 3 4
Adjust Paprpath
Menu Char Online
Setup
Print Macro
Online
Setup
Back Next
2 1 3 4
Print Macro
Online
Setup
Back Next
2 1 3 4
Load Macro=1 *
Online
Setup
Set < > Exit
2 1 3 4