AirLive WN-5000R - Manual (Page 87)

address (b): field, and input the end IP address in the right field to define a range of IP
addresses, or just input the IP address in the left field to define a single IP
address.
Client PC Please check all services you want to allow or
Service (c): deny this IP address to use, you can check multiple services.
Protocol (d): If the service you need is not listed above, you can create a new service on your
own. Please select TCP or UDP, if you’re not sure, please select ‘Both’.
Port Range (e): Please input the port range of new service here. If you want to specify port 80 to
90, please input ’80-90’; if you want to apply this rule on a single port, just input the
port number, like ‘80’.
Add (f): When you finish with all settings, please click ‘Add’ to save settings, you’ll be
brought back to previous menu, and the rule you just set will appear in current IP
filtering table.
If you want to remove all settings in this page, click ‘Reset’ button.
3-3-2 URL Blocking
If you want to prevent computers in local network from accessing certain website (like pornography, violence,
or anything you want to block), you can use this function to stop computers in local network from accessing
the site you defined here.
This function is useful for parents and company managers.
Please follow the following instructions to set URL blocking parameters:
Please click ‘Firewall’ menu on the left of web management interface, then click ‘URL Blocking’, and the
following message will be displayed on your web browser:
WN-5000R User’s Manual
84