AirLive WN-5000R - Manual (Page 84)

Computer’ or anything. You can input up to 16 alphanumerical characters here.
This is optional and you can leave it blank, however, it’s recommended to use this
field to write a comment for every MAC addresses as a memory aid.
Add (4): Click ‘Add’ button to add the MAC address and associated comment to the MAC
address filtering table.
Reset (5): Remove all inputted values.
MAC Filtering All existing MAC addresses in filtering table
Table (6): will be listed here.
Delete Selected (7): If you want to delete a specific MAC address entry, check the ‘select’ box of the
MAC address you want to delete, then click ‘Delete Selected’ button. (You can
select more than one MAC addresses).
Delete All (8): If you want to delete all MAC addresses listed here, please click ‘Delete All’ button.
Reset (9): You can also click ‘Reset’ button to unselect all MAC addresses.
Enable IP Check this box to enable IP address based filtering, and please select ‘Deny’ or
Filtering Table (10): ‘Allow’ to decide the behavior of IP filtering table. If you select deny, all IP addresses
listed in filtering table will be denied from connecting to the network; if you select
allow, only IP addresses listed in filtering table will be able to connect to the network,
and rejecting all other network devices.
IP Filtering All existing IP addresses in filtering table will be listed here
Table (11): .
Add PC (12): Click this button to add a new IP address to IP filtering table, up to 20 IP addresses
can be added.
Please refer to section 3-3-1-1 ‘Add PC’ below.
Delete If you want to delete a specific IP address entry,
Selected (13): check the ‘select’ box of the IP address you want to delete, then click ‘Delete
Selected’ button. (You can select more than one IP addresses).
Delete All (14): If you want to delete all IP addresses listed here, please click ‘Delete All’ button.
WN-5000R User’s Manual
81