AirLive WN-5000R - Manual (Page 75)

3-2 Network Address Trnaslation (NAT)
Network address translations solve the problem if sharing a single IP address to multiple computers. Without
NAT, all computers must be assigned with a valid Internet IP address to get connected to Internet, but Internet
service providers only provide very few IP addresses to every user. Therefore it’s necessary to use NAT
technology to share a single Internet IP address to multiple computers on local network, so everyone can get
connected to Internet.
Please follow the following instructions to set NAT parameters:
3-2-1 Basic NAT Settings (Enable or disable NAT function)
Please click ‘NAT’ menu on the left of web management interface, and the following message will be
displayed on your web browser:
1
2
3
To enable NAT function, please select ‘Enable’ for ‘Enable or disable NAT module function’ (1); to disable,
please select ‘Disable’.
After you made the selection, please click ‘Apply’ button (3), then Please press Apply.
WN-5000R User’s Manual
72