AirLive WN-5000R - Manual (Page 29)

MTU - Please use default value if you don’t know what it is, or ask your service
provider for a proper value.
Connection Type - There are 3 options: ‘Continuous’ - keep internet connection
alive, do not disconnect, connect on Demand - only connects to Internet when
there’s a connect attempt, and ‘Manual’ - only connects to Internet when ‘Connect’
button on this page is pressed, and disconnects when ‘Disconnect button is
pressed.
Idle Time Out: Specify the time to shutdown internet connect after no internet
activity is detected by minute. This option is only available when connection type is
‘Connect on Demand’.
2-3-4 Setup procedure for ‘PPTP xDSL’:
PPTP xDSL requires two kinds of setting: WAN interface setting (setup IP address) and PPTP setting (PPTP
user name and password). Here we start from WAN interface setting:
Select the type of how you obtain IP address from your service provider here. You can choose ‘Obtain an IP
address automatically’ (equal to DHCP, please refer to ‘Cable Modem’ section above), or ‘Use the following IP
address’ (i.e. static IP address).
WAN interface settings must be correctly set, or the Internet connection will fail even those settings of PPTP
settings are correct. Please contact your Internet service provider if you don’t know what you should fill in
these fields.
WN-5000R User’s Manual
26