AirLive WN-5000R - Manual (Page 62)

2-7-3 Wireless Security
It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users
can reach your network and valuable data without your consent and this will cause serious security problem.
To set wireless security settings, Please click ‘Wireless’ menu on the left of web management interface, then
click ‘Security Settings’, then follow the following instructions to set wireless security settings:
Please select an encryption method from ‘Encryption’ dropdown menu, there are four options:
2-7-3-1 Disable wireless security
When you select this mode, data encryption is disabled, and every wireless device in proximity will be able to
connect your wireless router if no other security measure is enabled (like MAC address access control - see
section 2-7-4, or disable ESSID broadcast).
Only use this option when you really want to allow everyone to use your wireless router, and you
don’t care if there’s someone reads the data you transfer over network without your consent.
2-7-3-2 WEP - Wired Equivalent Privacy
When you select this mode, the wireless router will use WEP encryption, and the following setup menu will be
shown on your web browser:
1
2
3
5
4
6
7
8
10
9
Here are descriptions of every setup items:
WN-5000R User’s Manual
59