AirLive WN-5000R - Manual (Page 50)

2-6-2 DHCP Server:
1
3
2
4
These settings are only available when ‘DHCP Server’ in ‘LAN IP’ section is ‘Enabled’, and here are
descriptions of every setup items:
Lease Time (1): Please choose a lease time (the duration that every computer can keep a specific
IP address) of every IP address assigned by this router from dropdown menu.
Start IP (2): Please input the start IP address of the IP range.
End IP (3): Please input the end IP address of the IP range.
Domain Name (4): If you wish, you can also optionally input the domain name for your network. This
is optional.
Recommended Value if you don’t know what to fill:
Lease Time: Two Weeks (or ‘Forever’, if you have less than 20 computers)
Start IP: 192.168.1.1
End IP: 192.168.1.200
Domain Name: (leave it blank)
NOTE:
1. The number of the last field (mentioned ‘d’ field) of ‘End IP’ must be greater than
‘Start IP’, and can not the same with router’s IP address.
2. The former three fields of IP address of ‘Start IP’, ‘End IP’, and ‘IP Address of ‘LAN
IP’ section (mentioned ‘a’, ‘b’, and ‘c’ field) should be the same.
3. These settings will affect wireless clients, too.
WN-5000R User’s Manual
47