AirLive WN-5000R - Manual (Page 56)

numbers are 1 to 13. You can choose any channel number you want to use, and
almost all wireless clients can locate the channel you’re using automatically
without any problem. However, it’s still useful to remember the channel number
you use, some wireless client supports manual channel number select, and this
would help in certain scenario when there is some radio communication problem.
NOTE: If you don’t special reason to limit the type of allowed wireless client, it’s
recommended to choose ‘2.4 GHz (B+G+N) to maximize wireless client
compatibility.
TIPS: You can try to change channel number to another one if you think the data
transfer rate is too slow, or keep having problem while transferring the file over
wireless network. There could be some other wireless routeres using the same
channel, which will disturb the radio communication between wireless client and
the wireless router.
2-7-1-2 Setup procedure for ‘AP Bridge-Point to Point:
In this mode, you can connect your wireless router with another, to combine two access points and expand
the scope of wireless network, and all clients (wired only – AP will not accept wireless clients in this mode) of
two wireless routers will think they’re on the same physical network. This function is very convenient when
you need to connect two networks between two buildings. Here are instructions about how to connect two
wireless routers together:
1
2
3
4
5
WN-5000R User’s Manual
53