AirLive WN-5000R - Manual (Page 83)

3-3-1 Access Control
This function allows or denies computers with specific MAC address from connecting to the network; it can
also allow or deny computers with specific IP address, protocol, or port.
Please click ‘Firewall’ menu on the left of web management interface, then click ‘Access Control’, and the
following message will be displayed on your web browser:
1
4 5
6
3
2
Here are descriptions of every setup items:
7 8
12 13 14 15
10
11 9
Enable MAC Check this box to enable MAC address based
Filtering (1): filtering, and please select ‘Deny’ or ‘Allow’ to decide the behavior of MAC filtering table.
If you select deny, all MAC addresses listed in filtering table will be denied from
connecting to the network; if you select allow, only MAC addresses listed in filtering
table will be able to connect to the network, and rejecting all other network devices.
Client PC Please input the MAC address of computer
MAC address (2): or network device here, dash ( - ) or colon ( : ) are not required. (i.e. If the MAC
address label of your wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or
‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’
Comment (3): You can input any text here as the comment of this MAC address, like ‘ROOM 2A
WN-5000R User’s Manual
80