AirLive WN-5000R - Manual (Page 26)

If you’re not sure, please contact your Internet service provider. A wrong Internet connection type will cause
connection problem, and you will not be able to connect to internet.
If you want to go back to previous step, please press ‘Back’ button on the bottom of this page.
NOTE: Some service providers use ‘DHCP’ (Dynamic Host Configuration Protocol)
to assign IP address to you. In this case, you can choose ‘Cable Modem’ as Internet
connection type, even you’re using another connection type, like xDSL. Also, some
cable modem uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem
connection, even you’re using a cable modem.
2-3-1 Setup procedure for ‘Cable Modem’:
1
2
3
Here are descriptions of every setup items:
Host Name (1): Please input the host name of your computer, this is optional,
and only required if your service provider
asks you to do so.
MAC address (2): Please input MAC address of your computer here, if your service provider only
permits computer with certain MAC address to access internet. If you’re using the
computer which used to connect to Internet via cable modem, you can simply
press ‘Clone Mac address’ button to fill the MAC address field with the MAC
address of your computer.
After you finish with all settings, please click ‘OK’ (3) button; if you want to go back to previous menu, click
‘Back’.
WN-5000R User’s Manual
23