AirLive SNMP-FSH2602MG v2 - Manual (Page 79)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 74
„
Create 802.1Q VLAN
1. Enable security VLAN setting: Select to enable or disable security VLAN group.
When you select to enable security VLAN group, only the members in this VLAN group
can access to the switch. The steps of setting security VLAN refer to the following step
2~ 8. After you have configured the security VLAN group, you can continue to create
other VLAN groups. When you don’t select to configure security VLAN group, then just
create VLAN group refer to following step 2 ~ 8.
Note: There is only one security VLAN group.