AirLive SNMP-FSH2602MG v2 User Manual
Page 62

4. Web Management in SNMP-FSH2602MG v2
57
AirLive SNMP-FSH2602MG v2 User’s Manual
configuration or you re-configure one of the slave switched as the master by console
interface.
1. Click
“IP Stacking” in the menu bar.
2. Group ID (0...65535): Assign a group ID for stacking group. The switches in the same
stacking group have same group ID. The valid range is from 1 to 65535.
3. Stacking Mode: Select the stacking mode from drag down list.
Disable: It means the switch doesn’t belong to any stacking group or stacking
function is disabled.
Master: It means the switch is the leader (master) in the stacking group. The
master switch can control all the slave switches in stacking group.
Slave: it means the switch is a slave switch of the stacking group. To configure the
slave switch that you must access by the master switch.
4. System Information: Enter system information in box.
- AirMax5 (146 pages)
- AirMax5N (93 pages)
- AirMax5X (91 pages)
- AirVideo-100 (67 pages)
- AirVideo-100v2 (63 pages)
- AirVideo-2000 (31 pages)
- AP60 (101 pages)
- BT-201USB (63 pages)
- BT-302USB (52 pages)
- BU-3026 (64 pages)
- CamPro Professional (178 pages)
- CoreNVR 16 (55 pages)
- DS-100 (34 pages)
- DS-100 v2 (36 pages)
- ES-4000 v2 (168 pages)
- ES-6000 (221 pages)
- Ether-FSH2402NT (19 pages)
- Ether-FSH2422W (55 pages)
- Ether-GSH16TW (42 pages)
- Ether-GSH2404W (50 pages)
- Ether-GSH2416W (61 pages)
- Ether-GSH24T v.2 (16 pages)
- Ether-GSH24TW (42 pages)
- Ether-GSH8TW v2 (36 pages)
- EtherWe-1000U (15 pages)
- G.DUO (137 pages)
- HP-1000E v2 (13 pages)
- HP-2000E (29 pages)
- HP-3000E (15 pages)
- IAR-5000 v2 (202 pages)
- IAS-2000 (163 pages)
- IGR-1500 (78 pages)
- IGR-2500 (81 pages)
- Live-800G (16 pages)
- Live-GSH5T (25 pages)
- Live-GSH8T (25 pages)
- WFP-101U (133 pages)
- MU-5000FS A2 (42 pages)
- MW-2000S (225 pages)
- N.MINI (87 pages)
- N.Plug (103 pages)
- N.TOP (71 pages)
- NAS-235 (89 pages)
- NVR4 (85 pages)
- OD-2025HD (101 pages)