AirLive SNMP-FSH2602MG v2 User Manual

Page 17

Text mode
Original mode

3. Configuring the SNMP-FSH2602MG v2

AirLive SNMP-FSH2602MG v2 User’s Manual

After finishing the parameter settings, click “OK“. When the blank screen shows up,
press Enter key to bring out the login prompt. Key in the “airlive“(default value) for the
both User name and Password (use Enter key to switch), then press Enter key and the
Main Menu of console management appears. Please see below figure for login screen.

Telnet Management (Terminal): SNMP-FSH2602MG v2 can be managed through

telnet. To use the telnet, please open the command line windows. Then type “telnet

Baud Rate: 9600 bps

Data Bits: 8

Parity: none

Stop Bit: 1

Flow control: None