AirLive SNMP-FSH2602MG v2 - Manual (Page 12)

2. Installing the SNMP-FSH2602MG v2
7
AirLive SNMP-FSH2602MG v2 User’s Manual
and dust free.
B. Remove adhesive backing from your Rubber Feet.
C. Apply the Rubber Feet to each corner on the bottom of the SNMP-FSH2602MG v2.
These footpads can prevent the Switch from shock/vibration.
2.5.2 Rack-mounted Installation
The SNMP-FSH2602MG v2 comes with a rack-mounted kid and can be mounted in an EIA
standard size, 19-inch Rack. The SNMP-FSH2602MG v2 can be placed in a wiring closet
with other equipment. Perform the following steps to rack mount the SNMP-FSH2602MG
v2:
A. Position one bracket to align with the holes on one side of the SNMP-FSH2602MG v2
and secure it with the smaller bracket screws. Then attach the remaining bracket to the
other side of the SNMP-FSH2602MG v2.
B. After attached mounting brackets, position the SNMP-FSH2602MG v2 in the rack by
lining up the holes in the brackets with the appropriate holes on the rack. Secure the
SNMP-FSH2602MG v2 to the rack with a screwdriver and the rack-mounting screws.