AirLive IP-2000VPN User Manual
Page 83
4. Enter the Internet IP address or domain name of this device. (If you don't have a fixed IP address, you can
use a Dynamic DNS service to obtain a domain name).
Click "Next" to continue.
5. Click “Finish” to exit the Wizard.
The new entry will now be listed in "Dial-up Networking".
If necessary, you can change the settings for this connection by right-clicking on it, and selecting Properties.
To force all outgoing traffic to be sent via VPN, enable the setting “This is the default Internet connection”
on the Dialing tab. (Do NOT enable this setting if using Dial-up or PPPoE client software.)
To establish a connection:
1. Ensure you are connected to the Internet.
2. Select
Start - Settings - Dial-up Networking
.
3. Double-click the new VPN entry in Dial-up Networking.
4. Enter your User name and Password, as recorded in the Client database on the IP-2000VPN.
5. Click the "Connect" button.
AirLive IP-2000VPN User’s Manual
80