AirLive IP-2000VPN - Manual (Page 169)

Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting, and it is recommended to use it. By default, the IP-2000VPN will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the IP-2000VPN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
• Enter the IP-2000VPN's IP address in the Default Gateway field and click OK. (Your LAN
administrator can advise you of the IP Address they assigned to the IP-2000VPN).
• If the DNS Server fields are empty, select Use the following DNS server addresses, and enter the
DNS address or addresses provided by your ISP, then click OK.
Checking TCP/IP Settings- Windows XP
1. Select Control Panel - Network Connection .
2. Right click the Local Area Connection and choose Properties. You should see a screen like the
following:
3. Select the TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.
AirLive IP-2000VPN User’s Manual 166