beautypg.com

2 advanced internet – AirLive IP-2000VPN User Manual

Page 29

background image

AirLive IP-2000VPN User’s Manual

26

DNS

Automatically obtain

from Server

The DNS (Domain Name Server) address will be obtained automatically

from your ISP's server. Note that if using a fixed IP address, with no login

(login is set to "None"), then no Server is used, and this option cannot be

used.

Use this DNS

If this option is selected, you must enter the IP address of the DNS

(Domain Name Server) you wish to use.

Note:

If the DNS is unavailable, the "Backup DNS", entered on the

Internet - Options

screen, will be used.

Login

Login Method

If your ISP does not use a login method (username, password) for Internet

access, leave this at the default value "None (Direct connection)"

Otherwise, check the documentation from your ISP, select the login

method used, and enter the required data.

PPPoE - this is the most common login method, widely used with DSL

modems. Normally, your ISP will have provided some software to

connect and login. This software is no longer required, and should not

be used.

PPTP - this is mainly used in Europe. You need to know the PPTP

Server address as well as your name and password.

L2TP - You need to know the L2TP Server address as well as your

name and password.

Big Pond Cable - for Australia only.
SingTel RAS - for Singapore only.

Login User Name

The User Name (or account name) provided by your ISP.

Login Password

Enter the password for the login name above.

RAS Plan

For SingTel customers only, select the RAS plan you are on.

Server Address

If using PPTP, L2TP or Big Pond Cable, enter the address of your ISP's

server.

For PPPoE or SingTel RAS, the Server address in not required.

Connection behavior

Select the desired option:

Automatic Connect/Disconnect

An Internet connection is automatically made when required, and

disconnected when idle for the time period specified by the

"Auto-disconnect Idle Time-out".

Manual Connect/Disconnect

You must manually establish and terminate the connection.

Keep alive (maintain connection)

The connection will never be disconnected by this device. If