AirLive IP-2000VPN User Manual

Page 17

Using your Web Browser

To establish a connection from your PC to the IP-2000VPN:

1. Start your WEB browser.

2. In

the

Address

box, enter "http://" and the IP Address of the IP-2000VPN, as in this example, which uses

the IP-2000VPN's default IP Address:

3. You will be prompted for a username and password, as shown below.

4. Enter

admin

for the User name, and airlive for the Password.

5. These are the default values. Both the name and password can (and should) be changed, using the

Admin Login

screen. Once you have changed either the name or the password, you must use the

current values

If you can’t connect

If the IP-2000VPN does not respond, check the following:

• The IP-2000VPN is properly installed, LAN connection is OK, and it is powered ON. You can test the

connection by using the "Ping" command:

• Open the MS-DOS window or command prompt window.

• Enter the command:

ping 192.168.1.1

If no response is received, either the connection is not working, or your PC's IP address is not

compatible with the IP-2000VPN’s IP Address. (See next item).

• If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.1.2 to

192.168.1.254 to be compatible with the IP-2000VPN's default IP Address of 192.168.1.1. Also, the

Network Mask

must be set to 255.255.255.0. See Appendix A - PC Configuration for details on

checking your PC's TCP/IP settings.

Ensure that your PC and the IP-2000VPN are on the same network segment. (If you don't have a router, this

must be the case.)

AirLive IP-2000VPN User’s Manual