AirLive IP-2000VPN User Manual

Page 66

ESP SPI

This is required if either ESP Encryption or ESP Authentication is enabled.

• Each SPI (Security Parameter Index) must be unique.
• The "in" SPI here must match the "out" SPI on the remote VPN, and the "out"

SPI here must match the "in" SPI on the remote VPN.

• Each SPI should be at least 3 characters.

For Manual Key Exchange, configuration is now complete.

• Click "Next" to view the final screen.

• On the final screen, click "Finish" to save your settings, then "Close" to exit the Wizard.

IKE Phase 1

If you selected IKE, the following screen is displayed after the Traffic Selector screen. This screen sets the

parameters for the IKE SA.

AirLive IP-2000VPN User’s Manual