AirLive IP-2000VPN - Manual (Page 11)

1.2 Installation of the Router
Requirement
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and a Broadband modem (usually, DSL
or Cable modem).
Procedure
1. Choose an Installation Site
Select a suitable place on the network to install the IP-2000VPN. Ensure the IP-2000VPN and the
DSL/Cable modem are powered OFF.
2. Connect LAN Cables
• Use standard LAN cables to connect PCs to the Switching Hub ports on the IP-2000VPN. Both
10BaseT and 100BaseTX connections can be used simultaneously.
• If required, you can connect any LAN port to another Hub. Any LAN port on the IP-2000VPN will
automatically function as an "Uplink" port when required. Just connect any LAN port to a normal port
on the other hub, using a standard LAN cable.
• If desired, connect a PC (server) to the DMZ port. To use multiple servers, use a standard LAN cable
to connect the DMZ port to a normal port on another hub, and connect your servers to the hub. PCs
connected to the DMZ port are isolated from your LAN.
3. Connect WAN Cable
Connect the Broadband modem to the WAN port on the IP-2000VPN. Use the cable supplied with your
Broadband modem. If no cable was supplied, use a standard LAN cable.
AirLive IP-2000VPN User’s Manual 8