AirLive IP-2000VPN - Manual (Page 51)

AirLive IP-2000VPN User’s Manual 48
System Log
Select the desired option:
• Router operations (start up, get time etc) - This option will log normal Router
operations.
• Connections to the Web - based interface of this Router - This option will
log each connection to the Router itself, whenever the Web-based
management interface is used.
• Other connections and traffic to this Router - This option will log other traffic
sent to the Router itself, such as "pings" or RIP (Router Information Protocol)
packets.
• Known DoS attacks and Port Scans - This will log details of DoS (Denial of
Service) attacks which have been blocked by the built-in Firewall. This Firewall
uses "Stateful Inspection" technology to block packets which are individually
valid, but collectively form an attack. Port scans, where a series of ports are
checked to see if they are opened (available) and also logged.
VPN If enabled, the VPN log will record incoming and outgoing VPN connections.
View Log Button Use this to view each log, as required.
Clear Log
Button
Use this to restart the required log. This makes it easier to read the latest entries.
Timezone
Timezone Select the correct Timezone for your location. This is required for the date/time
shown on the logs to be correct.
Syslog Server
Enable Syslog If enabled, log data will be sent to your Syslog Server.
Syslog Server Enter the IP address of your Syslog Server.
Include Select the logs you wish to be included in the data sent to the Syslog Server.