Google Message Security Batch Reference Guide - Manual (Page 405)

Batch User Fields 417
modifyuser [email protected], [email protected]
• Adding a domain and removing a domain from the Approved Senders list,
either is correct:
modifyuser [email protected], approved_senders=”+jumboinc.com,-
hugeisp.com”
modifyuser [email protected], approved_senders=”jumboinc.com,-
hugeisp.com”
Note: See “approved_senders (for orgs)” on page 306 (for an org’s Approved
Sender lists) for additional examples.
Description
Addresses and domains can be added or removed from the user’s Approved
Senders list:
• Each address or domain needs its own operator (+ or -). The + symbol is
optional. The - symbol is required.
• empty -- This field is not active. It is empty.
• Lists of addresses or domains are comma delimited, and must be enclosed in
quotes.
• If on rare occasions an address has spaces, escape these spaces with
backslashes.
Field Type
User-level
Authorization
• Read: Sender Lists
• Write: Sender Lists