JLG X17J Plus Operator Manual - Manual (Page 88)

If working with the machine stabilised on slippery surfaces (marble, porphyry, polished
cement, smooth damp surfaces etc.) check that the movements of the basket do not cause the
tracks to move. If so, stop the operations and restore the safe operating conditions prescribed
by the manufacturer.
Make sure that the stabilisers rest on horizontal ground.
DO NOT REST THE STABILISERS ON VERTICAL OR INCLINED SURFACES.
6.4.10 AUTOMATIC LOWERING AND RAISING OF THE STABILISERS
JLG elevating platform is fitted with an innovative automatic levelling procedure that acts on
the stabilisers and uses the electronic spirit level provided on the main control board.
For the self‑levelling procedure, all the precautions described to this point apply.
Before starting the self‑stabilization make sure that the machine is on a slope less than the
total permitted limit for stabilization (see technical data of the machine) and verify that the
trajectory of the stabilizers is free of obstacles and impediments.
The automatic procedure for levelling the machine extends and retracts the stabilisers,
and consequently moves the machine. Always check that there are no people, animals or
things in the stabilisation area.
• AUTOMATIC LOWERING OF THE STABILISERS
Press and hold button 7 on the remote control.
The success of the self‑levelling procedure is confirmed by an icon displayed on the screen
for several seconds.
ATTENZIONE
ATTENZIONE
X17JPR0020413 84
BOOM LIFT MODELS X17JPLUS
JLG
DANGER
DANGER