JLG X17J Plus Operator Manual - Manual (Page 8)

PREFACE
The aim of this manual is to provide the user with the necessary instructions and essential
operating procedures to ensure correct and safe use of the machine for its intended purpo‑
ses, as well as to prevent serious injury to the operator and other persons.
IMPORTANT
IT IS MANDATORY TO KEEP TO ALL THE INSTRUCTIONS GIVEN IN THIS MANUAL.
THIS MANUAL MUST BE CAREFULLY READ AND UNDERSTOOD BEFORE OPERA‑
TING THE MACHINE.
As this manual is an essential work tool, it must be kept with the machine at all times, in the
special compartment, so as to be available for clarification whenever required.
As the manufacturer cannot control the conditions of the machine and the operations this is
used for, THE USER IS RESPONSIBLE for ensuring compliance with the safety procedures
described in this manual.
Every machine supplied is thoroughly adjusted and tested before being delivered. The ope‑
rator does not need to perform any adjustments before using the machine.
Every alteration and/or modification of the features of the original machine design without
previous written authorisation from the Constructor are PROHIBITED and THE RESPONSI‑
BILITY FOR THESE ACTIONS FALLS ON THE OPERATOR.
THE EMPLOYER MUST MAKE SURE THAT THE OPERATOR HAS THE REQUISITES
NECESSARY TO OPERATE THE MACHINE CORRECTLY AND THAT SUCH OPERA‑
TOR HAS CAREFULLY EXAMINED AND UNDERSTOOD THE INFORMATION
GIVEN IN THIS USER AND OPERATION MANUAL, RECEIVING SUITABLE TRAI‑
NING REGARDING USE OF THE MACHINE IN STANDARD AND EMERGENCY
CONDITIONS.
THE EMPLOYER MUST ALSO TRAIN OPERATORS REGARDING ANY NATIONAL
STANDARDS THAT ARE IN ADDITION TO THE INSTRUCTIONS CONTAINED IN
THIS DOCUMENT.
If the manual is damaged or lost, a copy must be requested directly from JLG.
X17JPR0020413 4
BOOM LIFT MODELS X17JPLUS
JLG