JLG X17J Plus Operator Manual - Manual (Page 152)

8.3.1 L IFTING THE MACHINE USING A FORKLIFT
The machine is equipped with two tubulars designed to lift the machine using a forklift of
suitable capacity.
It is absolutely forbidden to lift the machine if it is not completely closed and aligned in tran‑
sport position with the 4 stabilizers completely closed and lifted from ground.
Before proceeding verify the weight of the machine in the technical data of this manual and
make sure that the forklift is suitable for this weight. Verify also the dimensions of the forks
and make sure that the positioning of the load is in compliance with the requirements of the
forklift.
Proceed approaching carefully to the machine paying attention not to collide with parts of it
and cause damages to the structure.
During the operations of lifting and transport follow the requirements and dispositions pre‑
scribed for the use of the lifting device and/or by the security officer of the working environ‑
ment in which the operation is performed.
This operation must be performed by appropriate personnel possessing the regulatory requi‑
rements to the use of the lifting device chosen.
The manufacturer of the Platform is not responsible in any way for damages caused to the
machine, lifting device or persons and/or objects due to improper execution of this opera‑
tion.
BOOM LIFT MODELS X17JPLUS
JLG
148 X17JPR0020413
IMPORTANTE WARNING