JLG X17J Plus Operator Manual - Manual (Page 48)

4 INSTRUMENTS AND CONTROLS
Below is a description of all the controls and indicators present on the platform; each device
has a sticker that briefly describes its function applied nearby, often containing symbols that
are used to ensure quick and clear understanding. Before using the platform, the following
descriptions must be read in order to gain in‑depth knowledge of the functions of each devi‑
ce and to be aware of any suggestions provided by the manufacturer.
Before starting to use the platform, the operator must read and perfectly understand all the
instructions contained in this manual.
4.1 REMOTE CONTROL
The remote control contains most of the controls required for normal operation of the machi‑
ne.
The remote control is made up of buttons, joysticks, a key selector switch and a display.
The remote control continuously exchanges data with the machine’s main board, which in
turn transmits the information to be shown on the display.
X17JPR0020413 44
BOOM LIFT MODELS X17JPLUS
JLG
5 6 07071000B