JLG X17J Plus Operator Manual - Manual (Page 15)

If an operator is in the basket, it is forbidden to move the structure from the ground posi‑
tion, unless in an emergency situation (sudden operator illness, technical fault).
There is a control position available only for scheduled and unscheduled maintenance opera‑
tions, placed near the electrical components compartment on the machine.
On the electric board protection there is an auxiliary connector for the connection of the
optional second remote control (see photo).
To enable this position, use the key selector placed on the base of the turret and connect the
optional second remote control to the machine.
Before proceeding with the connection, carefully read the paragraph regarding the use of
the optional second remote control.
This control position can only be used to carry out checks and maintenance on the machine.
Do not use this position to control the machine during normal operations.
Note: it is absolutely forbidden to move the machine from this position if one ore more
operators are in the basket.
X17JPR0020413
BOOM LIFT MODELS X17JPLUS
JLG
11
ATTENZIONE
PHOTO 1
OPTIONAL SECOND REMOTE
CONTROL CONNECTOR POSITION OPTIONAL SECOND REMOTE
CONTROL CONNECTOR
DANGER
PHOTO 2